Results 1 to 10 of 10

Thread: Powerbank cable for Sony RX100-2 with wired remote control?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator -jeff's Avatar
    Join Date
    Jan 2018
    Location
    Nebraska!
    Posts
    280
    The coupler replaces the battery leaving the multi connector free for your intervalometer.

  2. #2
    Quote Originally Posted by -jeff View Post
    The coupler replaces the battery leaving the multi connector free for your intervalometer.
    OK, I understand.
    Would work, but leave the battery compartment open. When the battery compartment is open, it covers the tripod screw so, that I can not fix the camera. NO GOOD, unfortunately.

  3. #3
    Administrator -jeff's Avatar
    Join Date
    Jan 2018
    Location
    Nebraska!
    Posts
    280
    The RX100 II that I have and use as a camera trap and as a timelapse camera has a little hole in the battery door that the power wire runs through so you can close the battery door upon insertion of the adapter. The hole in the door has a rubber plug that you move out of the way to make room for the wire. Yours should have the same.

  4. #4
    Quote Originally Posted by -jeff View Post
    The RX100 II that I have and use as a camera trap and as a timelapse camera has a little hole in the battery door that the power wire runs through so you can close the battery door upon insertion of the adapter. The hole in the door has a rubber plug that you move out of the way to make room for the wire. Yours should have the same.
    Than you, Jeff. Now I found the hole when you pointed it out to me.
    So this alternative looks viable. FINE

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •