My project

[swisscore]

Hello,

I'm doing a dslr camera trap now.

The case is this one :

914tzAWRiIL._SL1500_.jpg

https://www.conrad.ch/fr/valise-dout...cs-658800.html

The DSLR will be my Nikon D750 with the 50mm or 24-120 probably ( I will do 2 differents housing fot these 2 differents lenses )

I will put a home made PIR sensor and connect via a jack 3.5mm connector to the case.
This electronic will have a light sensor, 16 differents modes (or less ) selectable with a rotary switch, led status who can be disabled and maybe more features if I find ideas or if you give me more ideas

I'm 3d drawing with Solidworks and 3d printing with my Prusa i3 MK2.5 differents pieces like to hold the 86mm filters and to fix it to the case, print in flex to do at least weatherproof protection

Now I need to find a hard solution to fix on a tripod,... with a 1/4" or 3/8"

For Flash I use Yongnuo flash at the moment I have a YN-685 with a YN-622N on the camera to remote the flash trigger.

here is a thingiverse link for more details :
https://www.thingiverse.com/thing:3259375

Here is some pictures about work in progress (04.12.2018) :