-
DSLR Camera Trap Build
Wanted to share my build here. I am a hobby photographer from New England and never could get enough time in the woods to capture the kinds of photos I wanted. I hang a lot of game cameras throughout the year and can find where the different animals move through but just couldn't get there in time to capture them. So I decided to step the camera trapping up and build a few DSLR camera traps.
I shoot canon so I bought some older Canon Rebel T2i and T3i cameras and some 18-55mm kit lens(fairly cheap if you spend enough time on eBay). I used a 3D printer for most of the supports/dummy batteries/ lens mounts ect..
Here are some photos of the camera box build, just a used Pelican 1300NF off of eBay. (There is an eBay theme here). I 3D print a camera mounting plate to be the height I want and glue it to the inside of the box.
Attachment 24720210420_143451.jpg20210420_142525.jpg20210420_174712.jpg
I use Ram Mounts for mounting and a ratchet strap to keep it all steady.
20210530_153540.jpg20210530_153130.jpg
I have made a box with an internal flash as well for a quick set type of deal. this one has a homemade PIR sensor for a trigger. (Shown here with a Yongnu flash, have since switched to Nikon SB-25/28)
Snapchat-1377403632.jpg20210403_073424.jpg
I have a mix-match of PIR sensors, I have a Camtraptions V2 and a few different homemade PIR sensors.
The next post will be about Flashes.
Last edited by ikeeisenhaur; 06-14-2021 at 07:56 AM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules