Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: SB-28's (external power)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Yes I understand it. However I could determine them. Also I manged the heating issue by putting following connections. Now the problem is the flash time again. After 8 hours of charging flash battery drains in 5-6 hours . Is it the nature of Yongnuo flashes?20200517_164536_mfnr.jpg

  2. #2
    Quote Originally Posted by Kamalawarna View Post
    Thanks Jeff. However yesterday I could turn on the flash for a little while with newly bought battery. Then I fully charged the battery today and tried and then this happened. How to decide whether inserts are in right holes properly? Here is a clear figure shiwing the holes.15894733099786648542138879892425.jpg
    Hey buddy,
    Yongnuo 560 flashes you have to mount the batteries in the lower 2 terminals only so I'm pretty sure if you find the 2 correct terminals your problem will go away

  3. #3
    Member
    Join Date
    Sep 2020
    Location
    Netherlands
    Posts
    2
    Did anyone consider using a Nikon SD-8 or SD-8A Battery Pack together with a SB-28? (A=European market, with different power plug) According to the SB-28 manual the recycling time will thus be shortened from 4 to 2.5 seconds, full power recovery. The pack holds 6 AA batteries wich looks like some xtra power although the remaining 4 in the flash get a different function: 'The Speedlight itself should be fitted with four batteries as per normal as these will power the Speedlights electronics - LCD, zoom head etc'. So, not the dreamed power extender but the short recycling time nevertheless is appealing. What do you think, is it worth buying one?
    Last edited by NielsK; 09-03-2020 at 12:32 PM.

  4. #4
    Thank you for your answer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •